Go back to Sample Device Configs

 
 

Sample Configuration Guide for

Grandstream HandyTone HT-286 Analog Telephone Adaptor

 

Grandstream 286 Sample Config - Example Configuration
If you have a question or comment about this sample device configuration, or do you wish to add a comment that might help the next person in their config?  Click here, and let us know.  Any constructive input is always greatly appreciated!

 
Device Description:

For the purposes of the configuration, the following instructions are for SIP registration accounts ONLY. With this device, you will need to place the adapter close to the analog phone you will be using.

 

HandyTone HT-286 Analog Telephone Adaptor

 

 
  1. Out of the package, plug the AC adapter into a wall socket and the HT-286�s power port. Plug an RJ-45 CAT-5 cable into the Ethernet port of the 286, the other end of which will go to your cable modem or router. Finally, plug the analog phone into your remaining port.
    Grandstream HT-286 Configuration (ipcomms.net)

 

  1. To access the device, pick up the phone, dial �***� for the main menu, then dial 02 for the IP address. �You will be told the IP address of your device (e.g. 192.168.0.100).
  1. Type the address into a web browser like this (http://192.168.1.6) and you should see the following screen.

    Also bear in mind that the device will read all three digits from each octet, Disregard the leading 0�s. For example, �192.168.001.006� would be �192.168.1.6.�

  1. You will see the following screen. The default password is �admin.� You may change this password later if you choose.
    Grandstream Device Configuration Password Screen

 

  1. After you log in, you will see the following screen.

 

Proxy:  

Grandstream sample configuration

 

  1. For SIP Username/Password Registration Use the following config:

From the default configuration, you will only need to modify the following fields:

SIP Server: SIP Domain/Proxy (from provisioning letter)
SIP User ID: Enter the SIP Username (from provisioning letter)
Authenticate ID: Enter the SIP Username (from provisioning letter)
Authenticate Password: SIP Password (from provisioning letter)
Name: Your name

  Grand Stream ATA Sample config ipcomms

SIP Registration: Yes

 

 

 

For IP Address Authentication (no SIP username/Password) Use the following config:

From the default configuration, you will only need to modify the following fields:

SIP Server: Originating IP Address (from provisioning letter)
SIP User ID: Leave Blank
Authenticate ID: Leave blank
Authenticate Password: Leave blank
Name: Your name

 

 

SIP Registration: Yes

 
  1. You can choose to change your codec to G.729A/B to save bandwidth, but not required.
      Grandstream ATA Advanced Option preferred vocoder ipcomms
     

   

 

  1. NAT Traversal: No
      grandstream budgetone 100 configuration step 6
  1. Click on the "Update" button at the bottom of the form.� Reboot the device and attempt to make a call.