Sample Configuration Guide for
SIPURA SPA941
|
 |
|
If you
have a question or comment about this sample device configuration,
or do you wish to add a comment that might help the next person in
their config?
Click here,
and let us know. Any constructive input is always greatly
appreciated!
To speak with a support technician for help with device
configuration,
login and chat.
|
| |
 |
This Config shows how to register
with SIP Username Password Registration
(use this configuration if you are
only using your IP address to register)
If you are using SIP Username/Password
Registration, use this
sample config. |
-
First, you wil lneed to check what IP address the phone
received. Press the "envelope" button.
Then press the button under the LCD screen word "save".
-
Open the web admin page at
https://x.x.x.x/
(where x.x.x.x is the ip address you determined in step 1).
-
Click on the "Admin Login" button at the top
right side of the screen.
4. Click
the "Ext 1" tab..
5. You need to
modify only a few parameters from the factory default. They are
listed here:
For SIP
Username/Password Registration you will need to change:
-
Proxy:
SIP Domain/Proxy (from provisioning letter, usually
sip2.ipcomms.net)
-
Register Expires: 3600
-
User ID:
SIP User
(from provisioning letter)
-
Password:
SIP Password (from provisioning letter)
-
Optionally, you can
also change your Preferred Codec: G729a or G.711
Click submit all changes and wait for your unit to reset.
6. Begin Making Calls. |
|
|
|
|
