Sample Configuration Guide for

SIPURA SPA941

IP Address Registration only

If you have a question or comment about this sample device configuration, or do you wish to add a comment that might help the next person in their config?  Click here, and let us know.  Any constructive input is always greatly appreciated!

To speak with a support technician for help with device configuration, login and chat.

This Config shows how to register with IP Address Registration (use this configuration if you are not using a SIP username or password to register) If you are using SIP Username/Password Registration, use this sample config.

The Linksys SPA942 IP telephone can be configured as a two (2) line or, via a simple software upgrade, a four (4) line full featured business phone with pixel based graphical display, speakerphone and headset port. Standard features on the Linksys SPA942 include a high resolution graphical display, speakerphone, and a 2.5 mm head-set port. With a simple software update, the Linksys SPA941 is upgradeable to a four line phone. Each line can be independently configured to use a unique phone number (or extension), or can be configured to use a shared number that is assigned to multiple phones. You can connect directly to an Internet Telephone Service Provider or connect to an IP PBX. It has easy installation and secure remote provisioning.

1. First, you wil lneed to check what IP address the phone received. Press the "envelope" button.  Then press the button under the LCD screen word "save".

   ---

2. Open the web admin page at https://x.x.x.x/ (where x.x.x.x is the ip address you determined in step 1). 

3. Click on the "Admin Login" button at the top right side of the screen.

5.   You need to modify only a few parameters from the factory default. They are listed here:

For SIP Username/Password Registration you will need to change:

• Proxy: SIP Domain/Proxy (from provisioning letter, usually sip2.ipcomms.net)

• Register Expires: 3600

• User ID: SIP User (from provisioning letter)

• Password: SIP Password (from provisioning letter)

• Optionally, you can also change your Preferred Codec: G729a or G.711