System Setup Guide
Getting started with MyOffice PBX business phone system. (This won't take long!)

#4 Inbound Routing (Destinations)



 

Before you begin, be sure that you have a DID setup in your IPComms user portal (www.myipcomms.net) and that it is pointing to your PBX (this should have been done for your during signup). Contact IPComms customer service if you have any questions.

 

Configure Inbound Destinations:

Select Dialplan from the drop-down list and then click Destinations.

../_images/fusionpbx_inboundd.jpg

Click on the

../_images/plus4.png

button on the right.

../_images/fusionpbx_inboundd1.jpg

Make sure Type is "Inbound", then enter your DID number into the Destination field.  

Select where you want your inbound call to be delivered by making a selection in the Action drop-down field.

Then make sure Enabled is "True" and click save.

../_images/fusionpbx_inboundd2.jpg

 

In the example above, when someone calls the phone number (DID) 555-867-5309, the call will be forwarded to extension 100.