Why Businesses Switch from Telnyx
Telnyx built a strong developer platform with its own private IP network. But if you just need SIP trunking for your PBX, there's a simpler, more cost-effective path.
Per-Channel Fees Add Up
Telnyx charges $12/mo per channel for the first 10, scaling down to $8/mo for 250+. That's $120/month just for 10 channels before you make a single call. IPComms charges $0 per channel — you only pay for minutes used.
Developer-First Complexity
Telnyx's Mission Control portal and API-first approach is built for developers. If you just want to connect your Asterisk or FreePBX, IPComms makes it simple — point your PBX at our SIP server and you're connected in minutes.
Support Gap
Telnyx support is primarily geared toward developers — documentation, API references, and ticket-based help. IPComms provides real human support via phone and email for every customer, from engineers who understand PBX configuration.
IPComms vs Telnyx: Feature-by-Feature
A detailed comparison of SIP trunking capabilities, pricing, and service for 2026.
| Feature | IPComms | Telnyx |
|---|---|---|
| Channel/Trunk Fees | $0 per channel | $8-$12/mo per channel |
| Inbound Rate (US) | $0.009/min | ~$0.005-0.01/min |
| Outbound Rate (US) | $0.010/min | ~$0.005-0.01/min |
| Local DID Numbers | $1.50/mo | ~$1.00/mo |
| Toll-Free Numbers | $2.00/mo | ~$2.00/mo |
| Contracts Required | No contracts | No contracts |
| Setup Complexity | Standard SIP config | Mission Control portal + API |
| Developer Required | No | Recommended |
| Phone Support | All customers | Primarily ticket/docs |
| Encryption | TLS 1.3 + SRTP | TLS + SRTP |
| STIR/SHAKEN | Included | Included |
| E911 | $1.50/number | $1.00/number |
| Uptime SLA | 99.99% | 99.99% |
| Number Porting | Volume discount (100+ numbers) | Free |
| PBX Compatibility | Any SIP device/PBX | Any SIP device/PBX |
| Established | 2002 (24 years) | 2013 (13 years) |
Cost Comparison: Real Numbers
Here's what a typical business actually pays per month with each provider.
IPComms
Lower CostExample: 10 DIDs, 10 concurrent channels, 5,000 outbound min, 3,000 inbound min
Telnyx
Same usage: 10 DIDs, 10 concurrent channels, 5,000 outbound min, 3,000 inbound min
Pricing based on publicly available rates as of March 2026. Telnyx channel fees are $12/mo each for the first 10 channels, $11/mo for channels 11-50, $9/mo for 51-250, and $8/mo for 250+. Per-minute rates vary by plan. Actual costs may differ based on usage and plan selection.
Which Provider is Right for You?
Choose IPComms if you:
- Run an existing PBX (Asterisk, FreePBX, 3CX, etc.) and need SIP trunking
- Want to avoid per-channel fees that inflate costs as you scale
- Need real phone/email support from people who understand PBX systems
- Don't have developers on staff and prefer simple SIP setup
- Value working with a provider established since 2002
Telnyx may be better if you:
- Need programmable APIs for voice, messaging, fax, and video
- Have in-house developers who prefer an API-first platform
- Want to leverage Telnyx's private IP network for global connectivity
- Are building a custom communications platform from scratch
- Need messaging, fax, and video in one API platform
Switching from Telnyx Takes Minutes
No downtime, no disruption. Keep your numbers, change your provider.
Sign Up & Configure
Create your IPComms account and configure your PBX with our SIP credentials. Takes under 10 minutes.
Test Your Connection
Make test calls to verify audio quality. Run both providers side-by-side during transition.
Port Your Numbers
Submit a porting request and we'll transfer your numbers from Telnyx with zero downtime.
Frequently Asked Questions
Common questions about switching from Telnyx to IPComms.
Is IPComms cheaper than Telnyx for SIP trunking?
For most businesses, yes. While Telnyx may have slightly lower per-minute rates on some plans, they charge $12/month per channel for the first 10 channels, $11/mo for the next 40, and so on. IPComms charges $0 per channel. For a business with 10 concurrent call channels, that's $120/month in channel fees alone with Telnyx vs $0 with IPComms. Combined with IPComms' transparent $0.009/min inbound and $0.010/min outbound rates, total monthly costs are typically lower with IPComms.
Can I switch from Telnyx to IPComms without downtime?
Yes. You can port your existing phone numbers from Telnyx to IPComms with zero downtime. The porting process typically takes 3–10 business days depending on the releasing carrier and 5-7 days for toll-free numbers. During the transition, you can set up IPComms SIP trunks alongside Telnyx and switch over when ready.
Do I need developers to use IPComms SIP trunking?
No. Unlike Telnyx which is designed as an API-first platform with its Mission Control portal, IPComms uses standard SIP protocol that works with any SIP-compatible PBX (Asterisk, FreePBX, 3CX, FreeSwitch, Microsoft Teams, etc.) out of the box. Just point your PBX at our SIP server and start making calls — no API keys or portal configuration needed.
How does IPComms compare to Telnyx's Mission Control portal?
Telnyx's Mission Control is a developer-oriented portal for managing SIP connections, messaging, and API credentials. IPComms takes a simpler approach — you get SIP credentials, point your PBX to our server, and you're connected. For businesses that just need SIP trunking without API management, IPComms eliminates unnecessary complexity.
What PBX systems does IPComms support?
IPComms works with any standard SIP device or PBX: Asterisk, FreePBX, 3CX, FreeSwitch, FusionPBX, Issabel, Kamailio, Yeastar, Cisco CUBE, Avaya, Genesys, and Microsoft Teams via Direct Routing. Telnyx also supports standard SIP, but their setup process typically involves configuring connections through their Mission Control portal and API.
How does IPComms support compare to Telnyx support?
IPComms provides real human support via phone, email, and ticket for all customers — no minimum spend required. Our engineers understand PBX configuration and can help troubleshoot your setup. Telnyx support is primarily geared toward developers, with documentation, API references, and ticket-based support. If you need someone to walk you through an Asterisk or FreePBX configuration over the phone, IPComms is the better fit.